Telecomanda universala Receiver Sky si TV .

Este preprogramata pentru receverele:

Sky Skybox ,

Sky Digibox,

Philips DSR3101-08, DSR2101/08, DSR3101 08,

Modele echivelente: RC1600/00, RC1630/00, 312814712383,

Manual de utilizare si coduri:

Function of the remoter control

The remoter can be acted on SKY and TV set .When it acts on SKY set, it will send an aptotic code When it acts on TV set, it will send different code which accord with the TV brand.

1. Device Key:  for selecting the device to be operated (TV, SKY).

2. Function Key: all the other keys expect operating buttons(For example :the number V buttons:0,1,2......9, the volume control buttons: VOL+.VOL- and etc.)

3. Operation Mode: Manual-setting mode, Quick Search mode, Key Detect mode

4. Infrared: signal emitter

5. Emitting diode: depict the sending code or setting state

Use of the remoter control

1. Manual-setting mode

Press the S key , the remoter acts on the SKY device, and send an aptotic code.

Press the TV key ,the remoter acts on the TV device.  Locate the right code of the TV brand from

attached code list to function the unit as follow:

1) Turn on your TV set;

2) Press TV key once ,the LED blinks once;

3) Press and hold SELECT and RED key, the LED blinks twice;

4) Press TV key again, the LED blinks once;

5) Enter the brand code (4 digits), If the entered brand Code is correct, the LED will blink twice and off automatically. If the entered Code is incorrect, the LED will blink once long and off automatically.

6) Press POWER key to turn off the TV Set if the TV work or not. If turn off, please press SELECT key to save the code . Try if keys on remote control work-op-not, please-check fhexode if or not to control the TV and SKY:

7) If the TV set not off .please press TV key once and press POWER key again , the remote will send next code of the brand , alternately press TV and POWER key ,the code can be searched forward .After search all code of the brand, press TV key again , the LED blinks twice and off automatically.

NOTE: If no key is pressed in 15 seconds, the remote controller will leave setup mode automatically.

2. Quick Search mode

After you have set up several times, the TV still does not work, or you cannot find the correct code in the Code List, Please try the Quick search.

1) Turn on your TV set

2) Press TV key once ,the LED blinks once;

3) Press and hold SELECT and RED key, the LED blinks twice;

4) Press TV key again, the LED blinks once-,

5) Keep on pressing POWER to turn off the TV See if the TV work or not. If the TV set not off .please press TV key once and press POWER key again , the remote will send next code of the brand , alternately press TV and POWER key ,the code can be searched forward; ,

6) If turn off, please press SELECT key to save the code, the LED blinks twice and off automatically. Try if keys on remote control work or not, if not please repeat 1)  -5);

NOTE: A) After search all code of the brand, press TV key again ,the LED blinks twice and off automatically.

B) If no key is pressed in 15 seconds, the remote controller will leave quick search mode automatically.

Code List